In fact, that is why the tests are open book. The best inspectors rely on the code book, not their recollection of the code. It is extremely important to be right on the safety issues in the code. If you have a basic understanding of terminology and you study using my practice question study technique, you should easily be able pass the exam first time and become an expert on the code at the same time while making the most of your time.
By doing practice questions and the taking timed practice exams along with special learning techniques this book will help you:. Learn the answers to many of the questions that will be on the test and thereby be able to answer them from recall memory, saving you precious time.
Become an expert at managing that time during the test, through test taking experience. Quickly learn a system of study that does do not waste time and is very effective in learning the material quickly and accurately.
Using questions to learn is far superior to just reading. When you read a question your mind in forced to think, after all you now have a problem to solve.
In order to pursue the answer, your mind is required to interpret what that problem is, then process that information, and finally find a solution through recall, or research. This system of study will teach you how to both recall the answers and research the answers quickly and effectively, in fact, you will find that this technique can be used for anything you want to learn and remember throughout your life. Practice Questions. The first section of practice questions contains hundreds of questions similar to those on the exam.
It is designed to help you learn the code and give you the practice need to the find answers quickly. Timed Practice Tests. Which of the following is not listed as contained on a certificate of occupancy. The name of the contractor B. Any special stipulations and conditions of the building permit. The name of the building official. The building permit number. What is the minimum amount that wood rafters or ceiling joists must bear on masonry or concrete walls?
What is the maximum allowable span for SS Douglas fir-larch 2X6 floor joist space 12 inches OC with a live load of 30 psf and a dead load of 10 psf, in residential sleeping areas? What are the required steel reinforcement rods for an 9. Not Required In dwelling units, where the top of the sill of an operable window opening is located less than 24 inches above the finished floor and greater than 72 inches above the finished grade or other surface below on the exterior of the building, the operable window must comply with which of the following: A.
Operable window with openings will not allow a 4-inch-diameter mm sphere to pass through where the openings are in their largest opened position. Operable windows that are provided with window opening control devices that comply with Section R Any of those above What is the maximum allowable span for cold-formed steel joists size S loaded with a live load of 40 PSF and spaced What are the required steel reinforcement rods for an 8 inch thick masonry foundation wall with a height of 6 feet 8 inches with an unbalanced backfill height of 5 feet constructed in sandy gravel soil?
The snow load or live roof load is 30 psf. General Contractors license B. Inspection certificates D. All B. What are the required steel reinforcement rods for an 10 inch thick masonry foundation wall with a height of 9 feet with a unbalanced backfill height of 8 feet constructed in SC soil? For the drip edge required on asphalt shingle roofs, what is the minimum overlap required for each adjacent segments of drip edge?
Lateral-inline-bracing B. Let-in-bracing C. Lumber-inline-bracing D.
0コメント